Sikring og tryghed/Kameraer/Indendørs kameraer

SmartLife Indendørs Kamera

Wi-Fi | HD 720p | Pan tilt | Cloud Storage (mulighed) / microSD (ikke inkluderet) | Med bevægelsessensor | Nattesyn | Grå / Hvid

Funktioner

Producentens varenummer: WIFICI20CGY
EAN nummer: 5412810290109
• Intelligent IP-kamera - reagerer automatisk for at optage alle bevægelser eller lyde i rummet
• HD-opløsning - giver krystalklare optagelser
• Sluttes nemt direkte til dit Wi-Fi-netværk - der kræves ingen separat hub
• Tovejskommunikation - så du kan høre og tale til personer i rummet
• Væg- og loftsbeslag medfølger - nemt at fastgøre, direkte fra emballagen
• Fuldt understøttet af alle andre produkter i Nedis® SmartLife-serien.
Som et vigtigt element i ethvert intelligent hjemmesystem har dette Nedis Smart Home-IP-kamera panorerings- og vippefunktioner, så det kan dække hele rummet.
Det trådløst styrede overvågningskamera kan tilsluttes direkte via dit Wi-Fi-netværk - der kræves ingen ekstra hub - og udløses af bevægelse og lyd i rummet.

Intelligent IP-kamera
Hjemmeautomation er nu blevet nemmere. Det brugervenlige kamera kan nemt tilsluttes det eksisterende Wi-Fi-netværk og overvåge enhver lyd eller bevægelse i værelser.
Det optager i HD-opløsning (1280 x 720 pixler) og giver komplet klarhed over de optagne billeder. Hertil kommer, at kameraet er ligeså kraftigt om natten: Med dets nattesynstilstand giver det en rækkevidde på 10,0 m.
Kameraet understøtter microSD-kort på op til 128 GB (medfølger ikke) og har rigelig hukommelse til optagelser, og dets elegante og kompakte design betyder, at det kan anbringes overalt i rummet og optage i en betragtningsvinkel på 110°, når dets 1/4" CMOS-sensor udløses.
Panorerings- og vippefunktionen gør kameraet i stand til at optage hen over et større område, når du styrer det ved hjælp af din telefon eller tablet.

Om Nedis SmartLife
Oplev et stort og stadigt voksende udvalg af produkter - som f.eks. pærer, kontakter, fatninger, sensorer og kameraer - der alle kan styres via en brugervenlig og intuitiv app.
Uanset om du er på udkig efter en enkelt intelligent pære eller et kamera, eller du vil automatisere hele huset, kan du her opleve, hvor tilgængelig intelligent teknologi er i dag.

Emballage

Pakkens indhold

IP camera
Alternative coloured cover
USB cable
Power adapter
Camera mount
Adhesive pad
Quick start guide

Detail mål på pakker Gaveæske med eurolock

Bredde Højde Længde
90 mm 95 mm 190 mm

Logistik dimensionerne

Pakket per Bredde Højde Længde Vægt
1 190 mm 100 mm 95 mm 215 g
20 410 mm 215 mm 485 mm 8820 g

Produktspecifikationer

Bredde 63 mm
Højde 96 mm
Dybde 58 mm
Vægt 215 g
Farve Hvid
Grå
Indbygget mikrofon Ja
Enhedens strømindgangsforbindelse Micro USB
Indgangsstrøm 1.0 A
Strømkabel side B Micro USB
Strømkabel side A USB
Strømkilde type Strømforsyning
Materiale Plastik
Cloud optagelsesfunktionalitet Ja
Integrerede højttalere Ja
Maksimal opløsning HD 720p
Megapixel 1 MPixel
Objektiv 4.0 mm
Strømkabellængde 2.00 m
Kompatibel med Nedis® SmartLife
Betragningsvinkel 110 °
Billedchip 1/3" CMOS
LED 1
Tilbehør Kameraholder
AC Adapter EU Stik
Selvklæbende pude
USB-Kabel
Indgangsspænding 5 V DC
Stik Euro
Maksimal transmissionsantenneforstærkning 3 dBi
Nattesyn 10 m
Maksimalt strømforbrug 4.5 W
Med bevægelsessensor Ja
App tilgængelig til Android™
IOS
Frekvensområde 2400 - 2483.5 MHz
Maksimal transmissionseffekt 18.5 dBm
Lagringstype 1 microSD (ikke inkluderet)
Cloud Storage (mulighed)
Pan tilt Ja
Understøttet trådløs teknologi Wi-Fi
Antal produkter i pakken 1 stk.
Driftstemperaturområde 0 - 50 °C

Support

Ofte stillede spørgsmål

Vi har fundet følgende spørgsmål til dig på engelsk

Use a Class 10 SD card up to 128GB.
Avoid so called "Ultra" or "Extreme"cards.
These fast cards often have compatibility issues.

You can bypass this error message.

- Click on OK and go on with the installation and follow the instructions.

Because your password or SSID is more than 20 characters, the QR-code that is generated by the app get smaller and it is more difficult for the camera too scan the QR-code.
The chance of errors while scanning are higher.

If the QR-code can't be scanned, you can use the SmartConfig mode.

tap "+" -> camera -> other (top right) -> SmartConfig and follow the steps in the app.
The length of your password/SSID does not matter when using this method.

Yes, Open te live stream of the camera.
Tap on Purchase VAS.
Here you can subcribe to the cloud storage service.
There is a 30 day free trail you can try.

No, unfortunately this is not possible at the moment.
Record and save the clips in the app itself (playback menu) and it will be saved to the ALBUM folder in the app.
From here you can save it to your mobile device.

When you SD-Card or Memory is full, the oldest file will be overwritten.

No, it only works for the camera device you have subscribed it with.

In the first screen of the Smart installation, select other on the top right.
Now select QR-Code.
Follow the steps in the app.
The camera will scan the QR code on your phone to install it.

No, this device is not compatible with Google/NEST Home (HUB)
The videostream is at moment not working with Google/NEST Hub.

This optional Cloud service can be added per camera.
Each individual camera will need it's own subscription.

Go to the live view of the camera
Tap on playback
Scroll through the timeline until you found the clip you want to save.
It will start playing
Press record
When you have reached the end of what you want to record, press record again and it will be saved to your mobile device.

Yes you can.
Each person needs a unique account on their mobile device.
To add them as "family members" follow these steps:
In the main screen of the app tap on the name of your home (top left)
Tap on Home management
Tap on the name of your home again.
Tap on "add family members" and fill in the account details of the person you want to add.
It will give them access to all the devices in your home as a normal member or admin (you can select this)

If you only want to share a single device in a home, go to the settings menu of the device and select "share device" -> add member.

You can add maximum 20 members.

This is probably a Wifi problem, this can be for various reasons.
1.) Wifi signal is unstable.
2.) Wifi signal is too weak.
3.) Using an access point with the same SSID and password that do not support the IEEE 802.11R standards.

Problem 1 can often be solved by restarting the router.
Problem 2 can be checked with an app Wifi analyzer with this the signal can be viewed and corrected to a better position.
Problem 3 can be checked as the access points are turned off, the Wifi signal is still good and the connection remains if the access points are a problem, a Mesh solution can then be used.
Please make sure that they support IEEE 802.11R standard.