Security & Sikkerhed/Smart Home/Observation

SmartLife Indendørs Kamera

Wi-Fi | HD 720p | Cloud / MicroSD | Nattesyn | Android™ / IOS | Hvid

Mærke: Nedis Artikelnummer: WIFICI05CWT EAN nummer: 5412810290048

SmartLife Indendørs Kamera

Wi-Fi | HD 720p | Cloud / MicroSD | Nattesyn | Android™ / IOS | Hvid

Producentens varenummer: WIFICI05CWT
EAN nummer: 5412810290048
Som et vigtigt element i ethvert intelligent hjemmesystem opretter dette Nedis® Smart Home IP-kamera direkte forbindelse til dit Wi-Fi-netværk - der kræves ingen ekstra hub - og kan udløses af bevægelse og lyd i rummet.

Intelligent IP-kamera
Hjemmeautomation er nu blevet nemmere. Det brugervenlige kamera kan nemt tilsluttes det eksisterende Wi-Fi-netværk og overvåge enhver lyd eller bevægelse i værelser.
Det optager i HD-opløsning (1280 x 720 pixler) og giver komplet klarhed over de optagne billeder. Hertil kommer, at kameraet er ligeså kraftigt om natten: Med dets nattesynstilstand giver det en rækkevidde på 5,0 m.
Kameraet understøtter microSD-kort på op til 128 GB (medfølger ikke) og har rigelig hukommelse til optagelser, og dets fleksible, bøjelige design betyder, at det kan anbringes overalt i rummet og optage i en betragtningsvinkel på 110° takket være dets 1/4" CMOS-sensor.
En 3M-klæbepude medfølger til fastgørelse på væggene i rummet

Om Nedis SmartLife
Oplev et stort og stadigt voksende udvalg af produkter - som f.eks. pærer, kontakter, fatninger, sensorer og kameraer - der alle kan styres via en brugervenlig og intuitiv app.
Uanset om du er på udkig efter en enkelt intelligent pære eller et kamera, eller du vil automatisere hele huset, kan du her opleve, hvor tilgængelig intelligent teknologi er i dag.
Funktioner

• Intelligent IP-kamera - reagerer automatisk for at optage alle bevægelser eller lyde i rummet • HD-opløsning - giver krystalklare optagelser • Sluttes nemt direkte til dit Wi-Fi-netværk - der kræves ingen separat hub • Tovejskommunikation - så du kan høre og tale til personer i rummet • Fuldt understøttet af alle andre produkter i Nedis® SmartLife-serien.

Vejl. udsalgspris (inkl. moms)

DKK 279

læg i indkøbskurven

Pakkens indhold

IP camera
USB cable
Power adapter
Adhesive pad
Quick start guide

Produktspecifikationer

Farve Hvid
Indbygget mikrofon Ja
Enhedens strømindgangsforbindelse Micro USB
Strømkabel side B Micro USB
Strømkabel side A USB
Strømkilde type Strømforsyning
Materiale Plastik
Cloud optagelsesfunktionalitet Ja
Integrerede højttalere Ja
Maksimal opløsning HD 720p
Operativ Temperatur -20-50 °C
Nattesyn 5 m
Megapixel 1 MPixel
Objektiv 4.0 mm
Strømkabellængde 2.00 m
Kompatibel med Nedis® SmartLife
Betragningsvinkel 110 °
Billedchip 1/3" CMOS
LED 1
Tilbehør AC Adapter EU Stik
Selvklæbende pude
USB-Kabel
Indgangsspænding 5 V DC
Lagringstype 1 MicroSD
Cloud
Indgangsstrøm 1 A
Maksimalt strømforbrug 2.5 W
Stik Euro
Trådløs teknologi Wi-Fi
Maksimal transmissionsantenneforstærkning 3 dBi
Maksimal transmissionseffekt 14 dBm
App tilgængelig til Android™
IOS
Frekvensområde 2400 - 2483.5 MHz

Ofte stillede spørgsmål

Vi har fundet følgende spørgsmål til dig på engelsk
In the first screen of the Smart installation, select other on the top right.
Now select QR-Code.
Follow the steps in the app.
The camera will scan the QR code on your phone to install it.
No, it only works for the camera device you have subscribed it with.
Yes, Open te live stream of the camera.
Tap on Purchase VAS.
Here you can subcribe to the cloud storage service.
There is a 30 day free trail you can try.
No, unfortunately this is not possible at the moment.
Record and save the clips in the app itself (playback menu) and it will be saved to the ALBUM folder in the app.
From here you can save it to your mobile device.
Unfortunately it's currently not possible to access it this way.
We are looking to add this functionality in the future.
When you SD-Card or Memory is full, the oldest file will be overwritten.
You can bypass this error message.

- Click on OK and go on with the installation and follow the instructions.

Because your password or SSID is more than 20 characters, the QR-code that is generated by the app get smaller and it is more difficult for the camera too scan the QR-code.
The chance of errors while scanning are higher.

If the QR-code can't be scanned, you can use the SmartConfig mode.

tap "+" -> camera -> other (top right) -> SmartConfig and follow the steps in the app.
The length of your password/SSID does not matter when using this method.
Please try the EZ mode installation

Reset the camera by holding down the reset button until you hear the sound

Open the app and tap + > camera > tap on QR code and select EZ mode > confirm it was reset > fill in the credentials of your 2.4Ghz wifi network > the installation will start: immediately walk towards your router with your phone to aid the installation
No, this device is not compatible with Google/NEST Home (HUB)
The videostream is at moment not working with Google/NEST Hub.
Use a Class 10 SD card up to 128GB.
Avoid so called "Ultra" or "Extreme"cards.
These fast cards often have compatibility issues.
An automation can be used to make a certain "event"(condition), trigger another action (Task)
A condition can be anything from motion detection, to a certain time, a certain temperature, sunrise.
Then you can make this condition turn on lights, turn on smart plugs, make a siren sound or a combination of multiple tasks.
This optional Cloud service can be added per camera.
Each individual camera will need it's own subscription.
Go to the live view of the camera
Tap on playback
Scroll through the timeline until you found the clip you want to save.
It will start playing
Press record
When you have reached the end of what you want to record, press record again and it will be saved to your mobile device.
Yes you can.
Each person needs a unique account on their mobile device.
To add them as "family members" follow these steps:
In the main screen of the app tap on the name of your home (top left)
Tap on Home management
Tap on the name of your home again.
Tap on "add family members" and fill in the account details of the person you want to add.
It will give them access to all the devices in your home as a normal meber or admin (you can select this)

If you only want to share a single device in a home, go to the settings menu of the device and select "share device" -> add member.
This is probably a Wifi problem, this can be for various reasons.
1.) Wifi signal is unstable.
2.) Wifi signal is too weak.
3.) Using an access point with the same SSID and password that do not support the IEEE 802.11R standards.

Problem 1 can often be solved by restarting the router.
Problem 2 can be checked with an app Wifi analyzer with this the signal can be viewed and corrected to a better position.
Problem 3 can be checked as the access points are turned off, the Wifi signal is still good and the connection remains if the access points are a problem, a Mesh solution can then be used.
Please make sure that they support IEEE 802.11R standard.
These type of cards can have compatibility issues and we recommend you use a regualr speed Class 10 card.
Var disse ofte stillede spørgsmål nyttige?
/
What can we improve?

Brug for hjælp til dette produkt?

Brugervejledning Brugervejledning Datablad Datablad Kvalitetsdokumentation

Kontakt vores support team for et svar på dit spørgsmål.

Kom i kontakt