SmartLife Full Färg Glödlampa

Wi-Fi | E14 | 350 lm | 4.5 W | RGB / Varm Vit | 2700 K | Android™ / IOS | Ljus | 1 st.

Egenskaper

Tillverkarens artikelnummer: WIFILC10WTE14
Streckkod: 5412810290024
• Ändra färg för att matcha ditt humör
• Ställ in ljusstyrkan upp till 350 lumen - på ett liknande sätt som med en vanlig 35 W-lampa
• Fjärrstyr ljuset - med anslutna enheter eller rösten
• Kan schemaläggas att starta och parkopplas för att fungera automatiskt med andra smarta apparater och armaturer
Nedis® trådlös smart lampa med fullfärg (E14-skruvfäste) ingår i den ständigt växande SmartLife-serien. Med den här lampan kan du kontrollera färgen och ljusstyrkan via din telefon, surfplatta eller röst (med hjälp av Amazon Alexa eller Google Home).

Ändra ljusstyrkan och färgen
Den här lampan kan ändras efter humör. Den erbjuder ljusstyrkeinställningar på upp till 350 lumen (motsvarar en traditionell 35 W-glödlampa) och alla färger utöver ett varmt, vitt sken.

Anslut trådlöst
Du kan enkelt ansluta den trådlöst till ditt nätverk med hjälp av Wi-Fi-routern. En intuitiv app gör att du kan ställa in tidsscheman och para ihop den med andra produkter från Nedis SmartLife-serien så att du kan skapa dina egna uppkopplade smarta hemmasystem.

Om Nedis SmartLife
Upptäck ett stort och ständigt växande sortiment av produkter - såsom lampor, brytare, uttag, sensorer och kameror - som alla kan styras med en lättanvänd och intuitiv app. Med röststyrningsfunktioner som stöds av Amazon Alexa och Google Home och utan behov av något annat än ditt befintliga Wi-Fi-nätverk är detta ett anslutet, smart hem på ett enkelt sätt.
Oavsett om du letar efter en enda smart lampa eller ett uttag, eller om du vill automatisera hela huset, kan du upptäcka hur lättillgängligt smart teknik är i dag.

Förpackning

Paketet innehåller

Smart bulb
Quick start guide

Storlek på förpackning Presentask med eurolock

Bredd Höjd Längd
62 mm 125 mm 62 mm

Förpackningsstorlek

Antal/kartong Bredd Höjd Längd Vikt
1 60 mm 63 mm 127 mm 63 g
40 340 mm 160 mm 520 mm 3140 g

Produktspecifikationer

Bredd 37 mm
Höjd 108 mm
Djup 37 mm
Vikt 60 g
Färg Vit
Material Plast
Kompatibel med Nedis® SmartLife
Maximal sändningseffekt 16 dBm
Maximal antennförstärkning 2 dBi
Färgåtergivningsindex (Ra) 80
Energiklass A+
Lampans angivna livslängd 25000 h
Belysningsfärg Varm Vit
RGB
Teknik LED
Maximal ström konsumtion 4.5 W
Energiförbrukning per 1000 timmar 4.5 kWh
Strålvinkel 160 °
Bas E14
Motsvarande effekt 35 W
Angivet ljusflöde 350 lm
Lampform Ljus
App tillgänglig för Android™
IOS
Sänd frekvensområdet 2400 - 2484 MHz
Förpackningstyp Gift Box with Euro Lock
Dimbar Ja
Trådlös teknologi som stöds Wi-Fi
Antal växlingscykler 10000 Switching Cykler
Antal lampor i förpackning 1 st.
Effekt 4.5 W
Färgtemperatur 2700 K
Ljuskälla LED
Inspänning 230 V AC
Drifttemperaturens omfång -20 - 45 °C

Support

Vanliga frågor

Vi har hittat följande frågor åt dig på engelska

You can select AP-mode on the top right of the first screen of the installation.
The app will ask you to reset the bulb and connect to the wifi signal if the bulb.

Install the device(s) in the Nedis SmartLife app.
Then import the app "Smart Life' into Google Home or Alexa.
All devices will now be visible in Google Home or Alexa and can be used.

To control your Nedis SmartLife products with Google Assistant, you need to assign your Smart Life products in a room also in Google home.

1. Start the Google home app.
2. choose Settings
3. choose More Settings
4. Go to the tab off your home.
5. If a device is not assigned to room, tab on the device name and assign it to a room.

Now, you can control your devices by Google home products.


Add the "Smart Life" service to Google Home (no Nedis in the name).

Go in Google Home to Assistent -> Home Control and choose here "Smart Life" as service.

Use the Login details of the "Nedis Smartlife" app.
Compatible Nedis SmartLife products will then be added to Google Home.

An automation can be used to make a certain "event"(condition), trigger another action (Task)
A condition can be anything from motion detection, to a certain time, a certain temperature, sunrise.
Then you can make this condition turn on lights, turn on smart plugs, make a siren sound or a combination of multiple tasks.

You can add maximum 20 members.

Yes you can.
Each person needs a unique account on their mobile device.
To add them as "family members" follow these steps:
In the main screen of the app tap on the name of your home (top left)
Tap on Home management
Tap on the name of your home again.
Tap on "add family members" and fill in the account details of the person you want to add.
It will give them access to all the devices in your home as a normal member or admin (you can select this)

If you only want to share a single device in a home, go to the settings menu of the device and select "share device" -> add member.

This is probably a Wifi problem, this can be for various reasons.
1.) Wifi signal is unstable.
2.) Wifi signal is too weak.
3.) Using an access point with the same SSID and password that do not support the IEEE 802.11R standards.

Problem 1 can often be solved by restarting the router.
Problem 2 can be checked with an app Wifi analyzer with this the signal can be viewed and corrected to a better position.
Problem 3 can be checked as the access points are turned off, the Wifi signal is still good and the connection remains if the access points are a problem, a Mesh solution can then be used.
Please make sure that they support IEEE 802.11R standard.

Visa alla produkter i: