Baksida Box
Tillbehör till: WIFIWC10WT / WIFIWS10WT / WIFIWS20WT | Ytmonterad | Vit
Egenskaper
• Material: ABS
Förpackning
Paketet innehåller
Kontaktinsats
Storlek på förpackning Klistermärke
| Bredd | Höjd | Längd |
|---|---|---|
| 230 mm | 36 mm | 150 mm |
Förpackningsstorlek
| Antal/kartong | Bredd | Höjd | Längd | Vikt |
|---|---|---|---|---|
| 1 | 120 mm | 40 mm | 200 mm | 47 g |
| 50 | 385 mm | 155 mm | 535 mm | 3000 g |
| 70 | 445 mm | 105 mm | 500 mm | 3700 g |
| 100 | 410 mm | 340 mm | 550 mm | 7040 g |
| 140 | 465 mm | 235 mm | 520 mm | 8400 g |
Produktspecifikationer
| Bredd |
86 mm |
| Höjd |
35 mm |
| Djup |
86 mm |
| Vikt |
42 g |
| Färg |
Vit |
| Material |
ABS |
| Hålavstånd monteringsplatta |
60 mm |
| Fäste |
Ytmonterad |
| Antal varor i paketet |
1 st. |
| Inre djup |
33 mm |
| Tillbehör till |
WIFIWC10WT WIFIWS10WT WIFIWS20WT |
Support
Vanliga frågor
Vi har hittat följande frågor åt dig på engelska
Can I give other people access to my Smartlife devices too?
Yes you can.
Each person needs a unique account on their mobile device.
To add them as "family members" follow these steps:
In the main screen of the app tap on the name of your home (top left)
Tap on Home management
Tap on the name of your home again.
Tap on "add family members" and fill in the account details of the person you want to add.
It will give them access to all the devices in your home as a normal member or admin (you can select this)
If you only want to share a single device in a home, go to the settings menu of the device and select "share device" -> add member.
My Smartlife products lose the Wifi connection every time.
This is probably a Wifi problem, this can be for various reasons.
1.) Wifi signal is unstable.
2.) Wifi signal is too weak.
3.) Using an access point with the same SSID and password that do not support the IEEE 802.11R standards.
Problem 1 can often be solved by restarting the router.
Problem 2 can be checked with an app Wifi analyzer with this the signal can be viewed and corrected to a better position.
Problem 3 can be checked as the access points are turned off, the Wifi signal is still good and the connection remains if the access points are a problem, a Mesh solution can then be used.
Please make sure that they support IEEE 802.11R standard.