SmartLife LED-Stripe
Wi-Fi | Kald Hvit / RGB / Varm Hvit | SMD | 5.00 m | IP44 | 2700 - 6500 K | 960 lm | Android™ / IOS
Egenskaper
• Rød, grønn og blå farge er tilgjengelig, eller så kan du kan velge nyanser av hvitt fra varmt til kaldt - alt etter humøret ditt
• Listen kan gjøres kortere eller lengre - for uendelige muligheter
• Dobbeltsidig klebeevne (3M) allerede påført - for enkel montering
• Fungerer som frittstående smartbelysning - kan også kombineres med andre SmartLife-produkter for å skape et komplett smarthjem
Siden denne LED-listen kombinerer både RGB- og varme og kjølige hvite LED-lamper, kan du lyse opp med den fargen du vil, eller bruke listen til å skape varmt eller kjølig, hvitt, indirekte lys
Lengden på 5 meter kan gjøres kortere eller lengre med lignende LED-lister, så mulighetene er uendelige
Det dobbeltsidige limet (3M) er allerede påført for enkel montering på enhver ren og flat overflate.
Emballasje
Innholdet i pakken
RGBW LED-list (5 m)
Wi-Fi-fjernkontroll
Strømforsyning
Hurtigveiledning
Forpaknings størrelse Gaveeske med eurolock
Bredde | Høyde | Lengde |
---|---|---|
50 mm | 190 mm | 185 mm |
Logistikk størrelse
Antall/kartong | Bredde | Høyde | Lengde | Vekt |
---|---|---|---|---|
1 | 182 mm | 50 mm | 210 mm | 420 g |
8 | 195 mm | 245 mm | 420 mm | 3720 g |
32 | 410 mm | 440 mm | 510 mm | 16000 g |
Produktspesifikasjoner
Bredde |
151 mm |
Høyde |
8 mm |
Dybde |
5000 mm |
Vekt |
310 g |
Inngangsspenning |
220 - 240 V AC 50/60 Hz |
Maksimal antenneforsterkning for overføring |
2.5 dBi |
Kompatibel med |
Nedis® SmartLife |
Strømkabel adapter lengde |
1.50 m |
Maksimal overføringseffekt |
16 dBm |
Fargegjengivelsesindeks (Ra) |
80 |
Lysfarge |
Varm Hvit Kald Hvit RGB |
App tilgjengelig for |
Android™ IOS |
Kapsling |
IP44 |
Maksimum forbruk strøm |
15 W |
Nettplugg |
Euro (CEE 7/16) |
Dimbar |
Ja |
Nominell lampelevetid |
20000 h |
Støttet trådløs teknologi |
Wi-Fi |
Skjærbar |
Ja |
Energiforbruk per 1000 timer |
15 kWh |
Materiale |
Silikon |
Feste |
Overflatemontert |
Uttrekkbar lyslist |
Ja |
Send frekvensområdet |
2412 - 2484 MHz |
Antall produkter i pakken |
1 stk. |
Enhetens inngangsforbindelse ® |
DC |
Fargetemperatur |
2700 - 6500 K |
Energiklasse |
F |
Nominell lysfluks |
960 lm |
Farge |
Flerfarget |
Kabel lengde |
5.00 m |
LED Type |
SMD |
LED-modul |
SMD 5050 |
Antall leds per meter |
90 stk. |
Støtte
Product Information Sheet
Andre språk
Vanlige spørsmål
Vi har funnet følgende spørsmål til deg på engelsk
Can the strip light up in multiple colours at the same time?
No, the LED's are not individually addressable.
My LED strip does not want to install with the EZ mode installation.
Please try the AP mode.
Make sure that you use a 2.4Ghz wifi network.
Reset the controller so the LED strip blinks slow. (press and hold the button on the controller)
If it blinks fast, reset it again and it will blink slowly
In the app:
+ > [your device] > tap on EZ mode and select AP mode > confirm it was reset > fill in the info of your wifi network > follow the steps in the app.
Hold your phone very close to the plug during the installation
This method uses a direct connection to the device to send the info of your wifi to it.
Holding it close optimises this connection
Can I just take the adhesive strip off?
Ensure that you only take off the plastic protection and not the entire adhesive strip.
If you remove the whole strip, you will not be able to stick it to anything.
Can I extend the strip?
Yes, you can purchase another set and plug the second strip in the first one.
If you extend it to 10m (5m extra) then you might see some loss in brightness at the end of the second strip.
We recommend you install multiple complete sets and group them in the app.
Now you can control all of the strips as if they are a single strip without any loss in brightness.
Can I give other people access to my Smartlife devices too?
Yes you can.
Each person needs a unique account on their mobile device.
To add them as "family members" follow these steps:
In the main screen of the app tap on the name of your home (top left)
Tap on Home management
Tap on the name of your home again.
Tap on "add family members" and fill in the account details of the person you want to add.
It will give them access to all the devices in your home as a normal member or admin (you can select this)
If you only want to share a single device in a home, go to the settings menu of the device and select "share device" -> add member.
My Smartlife products lose the Wifi connection every time.
This is probably a Wifi problem, this can be for various reasons.
1.) Wifi signal is unstable.
2.) Wifi signal is too weak.
3.) Using an access point with the same SSID and password that do not support the IEEE 802.11R standards.
Problem 1 can often be solved by restarting the router.
Problem 2 can be checked with an app Wifi analyzer with this the signal can be viewed and corrected to a better position.
Problem 3 can be checked as the access points are turned off, the Wifi signal is still good and the connection remains if the access points are a problem, a Mesh solution can then be used.
Please make sure that they support IEEE 802.11R standard.